|
Clipper- Angle Line
Detailed Description Peddinghaus Ocean Clipper
Technical specs:
Punching Tonnage = 75 Tons USA (68Metric)
Shear Tonnage= 100 Tons- USA(91Metric tons)
Punch Sizes: Standard(270); 1 1/4" diameter max
Metric (PFP#3); 26mm Diameter max
Drill Sizes: 5/16 through 1-9/16 Dia(#4Morse Taper)
"Y" Axis travel 12" starting 1/2" past datum.
"Z" Axis travel is 5" starting 1/2" past datum.
Minimum Guages: 272 punches, 271 dies
11/16" plus leg thickness for 1 1/2"x1 1/2" through 2"x" angle sizes
1 3/16" plus leg thickness for 2 1/2"x 2 1/2" /angle
1 1/4" plus leg thickness for 3" through 6" angle sizes
Minimum Guages: PFP#3punches and dies
15mm(.59") plus leg thickness for 40mm x 40mm (1 1/2" x 1 1/2") through 50x50(2"x2")angle sizes
24mm(.94") plus leg thickness for anything over 50mm x50mm (2"x2") through 150mm x 150mm (6"x6") angle sizes
Minimum Drill Guage: 0.5"
Maximum Drill Guage: 5.5"
Minimum Drop- 8.125"
Punch Cycle time: 2 seconds
Shear Cycle time: 5 seconds
Infeed Speed: 61Fps(18.5 meters/min.) maximum(X-Axis)
Drill feed Rate: 2-10 ipm
Material Sizes:
Angle Structural(inches)
Max. 6x6x5/8 thick
Min. 1 1/2x1 1/2x 1/8 thick
Metric Angle Structural:(mm)
Max: 150x150x15Thick
Min: 40x40x4 thick
|
